Ports
May 22, 2013, 02:06:32 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: SMF - Just Installed!
 
   Home   Help Search Login Register  
Welcome to the PORTS Forum. Please post your questions, answers, and comments relating to USB and other hardware interfaces in the appropriate forums below. - Jan
Ports > General Category > General Discussion > ATMEL89c52 Power Down Mode
Pages: [1]
« previous next »
  Print  
Author Topic: ATMEL89c52 Power Down Mode  (Read 1580 times)
thothefali
Member
*
Posts: 3
« on: November 09, 2011, 08:46:36 pm »
How long does it take to wake the ATMEL 89c52 from power down mode by an external interrupt???
Logged
Jan Axelson
Administrator
Frequent Contributor
*****
Posts: 1628


WWW
« Reply #1 on: November 09, 2011, 09:19:22 pm »
Did you look for this information in the chip's data sheet?

Jan
Logged
thothefali
Member
*
Posts: 3
« Reply #2 on: November 09, 2011, 09:33:42 pm »
 the data sheet  just says that  must do a hardware reset to exit from the power down mode. without mention for the time that needed to exit from the power down mode
Logged
Jan Axelson
Administrator
Frequent Contributor
*****
Posts: 1628


WWW
« Reply #3 on: November 09, 2011, 09:55:31 pm »
The data sheet says:

The reset should not be activated before VCC
is restored to its normal operating level and must be held
active long enough to allow the oscillator to restart and
stabilize.

How long this takes would vary with your supply and oscillator.

Jan
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!